If you are looking for a small but still extremely useful Rp2040 based board then you may want to take a look at the Tiny 2040 a board which is under half the size of the Raspberry Pi Pico The board can be directly soldered…
The Pico-10DOF-IMU is an IMU sensor expansion module which i sdesigned for the Raspberry Pi Pico. It has 2 sensors which provide gyroscope, accelerometer, magnetometer, baroceptor functionality and uses I2C bus for communication. When you combine this module with the Raspberry Pi Pico, it can…
In this article we connect a TLV493D magnetic sensor to a Raspberry Pi Pico running Circuitpython Sensor Information The 3D magnetic sensor TLV493D offers accurate three-dimensional sensing with extremely low power consumption in a small 6-pin package. With its magnetic field detection in x, y,…
In this article we connect a VCNL4040 to a Raspberry Pi Pico running Circuitpython Sensor Information The VCNL4040 integrates a proximity sensor (PS), ambientlight sensor (ALS), and a high power IRED into one small package. It incorporates photodiodes, amplifiers, and analog to digital converting circuits…
In this article we connect a DPS310 barometric pressure sensor to a Raspberry Pi Pico running Circuitpython Sensor Information The pressure sensor element is based on a capacitive sensing principle which guarantees high precision during temperature changes. The small package makes the DPS310 ideal for…
In this article we connect a PCT2075 temperature-to-digital converter to a Raspberry Pi Pico running Circuitpython Sensor Information The PCT2075 is a temperature-to-digital converter featuring ±1 °C accuracy over ‑25 °C to +100 °C range. It uses an on-chip band gap temperature sensor and Sigma-Delta A‑to‑D conversion technique…
In this article we connect a SHT40 Temperature & Humidity Sensor to a Raspberry Pi Pico running Circuitpython Sensor Information This is the next generation of SHT sensor, in the past we have had examples for sensors such as the SHt31 and now we move…
In this article we connect a AHT20 Temperature & Humidity Sensor to a Raspberry Pi Pico running Circuitpython Sensor Information AHT20, as a new generation of temperature and humidity sensors, has established a new standard in size and intelligence. It is embedded in a double…
In this article we look at a 1.3inch OLED Display Module For the Raspberry Pi Pico from waveshare, it measures 64×128 Pixels, it uses SPI/I2C Interface. It is a 1.3″ OLED Display Module which uses a SH1107 Driver and has a SPI or I2C bus…
In this article we look at the Pico Unicorn, this board provides 112 RGB leds which are arranged in a 16×7 matrix, there are also 4 buttons available on the board for your usage. The four switches are wired up as SW_A, SW_B, SW_X, and SW_Y. Programming the Pico Unicorn…
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Read More