In this article, we connect a KY-003 Hall Magnetic Sensor to a Raspberry Pi Pico, any Rp2040 type board will be suitable. We actually tested this with a Cytron Maker Pi Pico We will use Micropython for these examples but of course you can use…
Category:
Micropython
-
-
In this article, we connect an KY-011 Dual Color LED to a Raspberry Pi Pico, any Rp2040 type board will be suitable. We actually tested this with a Cytron Maker Pi Pico The KY-011 Dual Color LED module can emit red and green light. You…
-
In this example we use LEDs connected to the following pins – 16,17,18,19,20,21,22,26,27,28 to create the knight rider effect I tested this with cytron maker pi pico as it has LEDs connected to all the outputs Schematic If you want to build its fairly simple,…
-
In this article we connect a 5×5 RGB Led matrix from Pimoroni to the Raspberry Pi Pico Breakout Information Features 5×5 (25 total) RGB LEDs 15x15mm active area 3.5mm LED pitch I2C interface (address 0x74/0x77 (cut trace)) 3.3V or 5V compatible Reverse polarity protection Parts…
-
In this article we connect an Ultrasonic ranging module to a raspberry Pi Pico Features Ultrasonic ranging module HC – SR04 provides 2 cm – 400 cm non-contact measurement function, the ranging accuracy can reach to 3 mm. The modules includes ultrasonic transmitters, receiver and control…
-
In this article we look at another CD option for your Raspberry Pi Pico,its a 1.8 inch LCd with dimensions of 128 x 160 and is based on the ST7735 IC. There are many variants of the LCD that use this driver ic. This is…